Information required when ordering shaper cutters
2021-08-27 11:21:59
jiangxingTools
2527
Information required when ordering shaper cutters
1, Quantity of shaper cutter
2, Type of cutter - Disc, Shank or Hub with
3, Bore diameter or type of shank fitting required.
4, Pitch - (DP, CP or Module)
5, Pressure Angle.
6, PCD - Approximate pitch circle diameter or number of teeth.
7, Material.
8, Coating.
9, Complete geara or detailed component drawings should be supplied when ordering non-standard gear shaping tools.
相关文章
-
PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m5
PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m5Tooth profile：GB, DIN5480 standardMateri... - PA20° Profile DIN3972 Standard Pre-grinding Gear Hobber Cutter with Module m2.5
- PA20° Pre-shaving Gear Cuter Hob with Module m4.25
- Powder Metallurgy HSS ASP 2060
- GB Standard Gear Shaving Cutters with M2~M8
- HSS M2 M35 Material DIN3972 BP2 Module Gear Cutting Hob Cutter with PA20°
- HSS M2, M35, M42 Material Gear Shaper Cutter with PVD Coating TiN, AP
