PM-HSS S390 for Involute Gear Hob and Gear Hobber Cutter
2023-07-08 11:37:36
jiangxingTools
1991
PM-HSS S390 for Involute Gear Hob and Gear Hobber Cutter
This grade is PM steels with many positive usage properties, S390 is with good red hardness, compressive strength and wear resistance.
Chemical composition: C-1.64, Cr-4.8, Mo-2.0, V-4.80, W-10.40, Co-8
Standards of PM-HSS
Hanrdess of S390: HRC 66-68
The application of PM-HSS S390 is used for involute gear hobs, gear hobber cutter, gear hobbing tools, chain sprockt hob, worm wheel hobs and gear shaper cutters.
相关文章
-
PA20° Full-Topping Gear Cutter Hob with HSS Material
PA20° Full-Topping Gear Cutter Hob with HSS MaterialTo control both out-diameter on the bottom side... - G50/G55 High Speed Carbide Gear Hob with AT Coating
- PA20° Pre-shaving Gear Hob with Module m4
- Module, DP and CP for Spur Gear Hobs
- PA30° DIN5480 Involute Spline Hob Cutter with Module m3
- PA20° DP22 Standard Gear Hob Cutter with BPⅡ
- DP and Module Worm Gear Hobs
