Tip Chip Thickness for Hobs
2022-02-09 09:16:09
jiangxingTools
2127
Tip Chip Thickness for Hobs
The tip chip thickness is an important criterion for hob design and optimization. the tip chip thickness is the theoretical maximum chip thickness which can be removed by the tooth tips of the hob.
The following hob characteristics and cutting parameters are taken into account during calculation of the tip chip thickness:
1), module
2), number of teeth
3), helix angle
4), profile displacement
5), cutter diameter
6), number of gashes
7), number of starts
8), axial feed
9), cutting depth
Any more information on module and dp gear hobs, please visit our website.
相关文章
- PA20° Profile DIN3972 Standard Pre-grinding Gear Cutting Hob with Module m2.75
- PA20° Standard Involute Gear Milling Cutter with Module m3.75
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m4
- HSS Erasteel Bohler M35 Material DP and Module Gear Hob Cutter with AP Coating
- PA20° Profile DIN3972 Standard Gear Hob with Module m3
- PA30° DIN5480 Involute Spline Hob Cutter with Module m1
- Timing Pulley Hob for (AT.)D.T AT10